Cables

• Thin 90-degree male to male BNC cable with a 2.5 mm outer diameter.
• Supports transfer of serial data and video signals with 75 ohm impedance.
• Operates at frequencies from DC to 1 GHz with a maximum VSWR of 1.2.
• Compatible with HD cameras, gimbals, monitors, EVF, antennas, and SDI Wireless TX/RX sets.

• Thin 90-degree male to male BNC cable with 2.5 mm outer diameter.
• Supports transfer of serial data and video signals.
• Impedance of 75 ohms and frequency range from DC to 1 GHz.
• Connects SDI equipment and is 3G-SDI rated.

• Thin 90-degree male to male BNC cable with 12-inch (30,48cm) length.
• Supports transfer of serial data and video signals.
• Impedance rated at 75 ohms with frequency range DC to 1 GHz.
• Designed for SDI equipment including HD cameras, monitors, and wireless transmitters.

• High-quality 90-degree Male BNC to 90-degree Male BNC shielded cable.
• Designed to record and transfer video signals including 12G 4K ProRes raw.
• Cable length is 24 inches (60.96 cm) with a thin gauge outer diameter of 0.159 inches (4 mm).
• Impedance of 75 ohms and frequency range from DC to 12 GHz.

• D-Tap power cable specifically designed for Sony FX9 and FX6 cameras.
• Integrates reverse polarity protection to prevent electrical damage.
• Regulates voltage from 14.4V to 19.5V required by the cameras.
• Features aluminum casing with LED indicators for power status.

• USB-C to USB-C fast charging cable compatible with various USB-C devices including B-Mount batteries.
• Supports bi-directional charging with SHAPE’s 450W Fast Charger and D-Tap to USB-C bi-directional charging adapter.
• Cable length is 40 ¼ inches (102 cm) for versatile use.
• Constructed from resistant materials and includes a 30-day limited warranty on manufacturer defects.

• Regulates voltage to 19.5V for Sony FX6 camera power.
• Allows powering FX6 camera from any V-mount or Gold mount battery with D-Tap.
• Cable length is 15 inches (38 cm) end-to-end.
• Connectors include 1 x D-Tap and 1 x DC Barrel.

• D-Tap adapter converts 11-17 V input to 5 V USB output and D-Tap output.
• Allows charging of mobile phones or other USB devices via camera batteries.
• Compatible with Gold Mount or V-Mount camera batteries.
• Compact dimensions of 1.97 × 1.65 × 0.79 inches (5,00 x 4,20 x 2,00cm).

• Connects Panasonic AU-EVA1 and Sony FS7/FS5 cameras to D-Tap battery power.
• 22-inch cable length for flexible setup.
• Converts 12 to 18 V input to regulated 12 V output.
• Maximum current draw of 3 A with a built-in regulator.

• Coiled cable extends from 18 inches to 48 inches.
• Connects D-Tap power sources to devices with 4-pin XLR female inputs.
• Input voltage range is 11 to 28 VDC.
• Features P-Tap connector and 4-pin XLR female connector.

• Coiled D-Tap to DC 5.5 x 2.1 mm barrel power cable extending from 10 to 24 inches.
• Includes right-angle connector for improved cable management.
• Compatible with V-Mount and Gold Mount batteries.
• Provides unregulated power supply from 11 to 16.8 VDC.

• Four female D-Tap receptacles for multiple device connections.
• Splitter cable powers up to four separate devices from one source.
• Designed for powering multiple wireless receivers and an Ultralight 2.
• Supports a maximum current of 10A from a single camera battery.

• Coiled D-Tap to 2-pin LEMO-type power cable for RED® KOMODO™ & KOMODO™ 6K Production Pack.
• Cable extends from 10 to 24 inches in length.
• Features right-angle connector for neater cable management.
• Supports unregulated input and output from 11 to 17 VDC.

• Power cable designed for Canon C80 camera.
• Coiled D-Tap to 5.5 x 2.5 mm barrel connector cable.
• Right-angle connector for organized cable management.
• Operates within 11 to 24 VDC voltage range.

• D-Tap to 2-Pin LEMO type power cable for Blackmagic PYXIS 6K.
• Cable length is 11 1/4 inches (28.5 cm).
• Enables power connection from D-Tap battery sources.
• Compatible with D-Tap connectors and Blackmagic PYXIS 6K.

• 20-inch coiled D-Tap to D-Tap cable.
• Maximum extended length of 2.5 feet (76 cm).
• Connects BPU battery to external power sources.
• Compatible with standard Anton Bauer and IDX D-Tap outputs.

• 100W D-Tap to USB-C bi-directional charging adapter.
• Compatible with Gold Mount, V-Mount, and BP-U batteries.
• Uses PD charging protocol Type C with 10-16.8 V and 10 A output on D-Tap.
• Heat dissipating casing prevents overheating.