Cadeau SMAG

• High load friction arm with camera bracket for mounting cameras, monitors, lights, or microphones.
• Fully articulated arm with 90° pivotable and 360° rotatable ends and 360° rotatable elbow.
• Locking knob enables partial loosening for precise and safe positioning.
• Made of CNC aluminum and supports up to 7 lb load.

• 7" Magic Arm with three points of articulation.
• Supports mounting of monitors, LED lights, or microphones up to 5 lbs.
• Central lock rosette with a thumb knob for simultaneous tightening of joints.
• Made of CNC aluminum with 1/4-20 captive screws and rubber-topped platforms.

• Heavy-duty two-section boom pole extends up to 120 inches and collapses to 68 inches.
• Constructed from black chrome stainless steel and reinforced steel tubing for strength and rigidity.
• Features universal 1⅛" (Junior) female receiver with 5/8" (baby) adjustable male stud for broad compatibility.
• Unique spring-loaded ratchet wheel mechanism allows smooth tightening and stability without sandbags.

• Made of robust aluminum with chrome plated steel 5/8" Baby Pin.
• Jaw opening range of 13-55mm (0.5-2.1 in) with protective pads for strong grip.
• Features a jaw ratchet knob for flexible closing and removable impact wedge inserts.
• Includes three 1/4-20 threaded holes for attaching accessories.

• 40-inch stainless steel arm designed for mounting on C-Stands and light stands.
• Features a 5/8-inch diameter bar with a length of 42 inches (106.68 cm).
• Equipped with anti-slip studs at both ends with 1/4-20 and 3/8-16 threads.
• Compatible with grip heads at each end for secure attachment.

• Designed to match the RED® KOMODO™ optical center with or without the expander module.
• Features a padded and comfortable shoulder pad with composite mini shoulder and back pads.
• Includes L-shaped top handle made of CNC aluminum and Canadian maple with push-button technology.
• 15 mm LW baseplate system with adapter plate, sliding dovetail, and multiple accessory mounting points.

• CNC aluminum clamp fits smartphones 2.5 to 3.5 inches wide.
• Clamp includes swivel bracket with tilt functionality for smartphone adjustment.
• Equipped with female and male cold shoes for mounting accessories and camera attachment.
• Rubber pads inside clamp protect smartphone during use.

• V-Lock Quick Release Plate and Adapter for camera mounting.
• Compatible with third party V-lock delta plates like Sony VCT-U14.
• Adjustable and removable camera stoppers.
• Supports loads up to 50 lb.

• Quick-Release Monitor Mount designed for VESA pattern monitors.
• Allows quick removal of the monitor from the mounting plate.
• Features a locking knob to securely hold the monitor in place.
• Compatible with SHAPE's VESA monitor support with Push Button system.

• Fits around the Sony FX6 top handle.
• Lightweight and made of CNC aluminum.
• Multiple 1/4-20 and 3/8-16 threaded holes with anti-rotating holes.
• Designed with a threaded hole for FX6 viewfinder cable clamp.

• Charges up to four V-Mount lithium-ion batteries simultaneously.
• Each channel provides a 2.5A charge current.
• Includes 4-pin XLR DC power output delivering up to 60W at 15V.
• Features integrated carry handle and light indicators for charge status.

• Dual V-Mount 100W fast charger with LCD display.
• Self-adaptive dual channels charge two batteries simultaneously.
• Automatically identifies battery capacity and adjusts charging current up to 6 amps.
• Compatible with most non-chipped battery brands.

• Designed to attach multiple camera accessories.
• Allows handgrip placement in up, side, and down positions.
• Features several 3/8-16 anti-rotating threaded holes.
• Handgrip made of Canadian maple for ergonomics and comfort.

• Includes Sony FX6 baseplate (BP10), top plate, controller top handle, viewfinder mount, matte box, and follow focus pro.
• Designed to enhance and adapt the Sony FX6 camera rig for professional use.
• Features versatile components such as a swing-away matte box and push-button viewfinder mount.
• Components are compatible specifically with the Sony FX6 camera.

• Includes FX6 cage, baseplate, and left Arri rosette handle with Push-Button technology.
• Baseplate features Arri rosette, shoulder mount, and 15 mm rod system.
• Comes with two pairs of 15 mm rods (8 in and 4 in).
• Includes a sophisticated toolbox for screws and Allen key storage.

• Connects Panasonic AU-EVA1 and Sony FS7/FS5 cameras to D-Tap battery power.
• 22-inch cable length for flexible setup.
• Converts 12 to 18 V input to regulated 12 V output.
• Maximum current draw of 3 A with a built-in regulator.

• Attaches underneath Sony FX6 camera with 3/8-16 and 1/4-20 screws.
• Includes an adapter plate and a pair of 12-inch 15 mm rods.
• Features mounting holes for securing camera or tripod plate.
• Equipped with ratchet key knobs and rubber pads for protection.

• Arm features 3 points of articulation with patented Push-button technology.
• Ergonomic handle with rubber handgrips for stability and precision.
• Stainless steel locking mechanism ensures durability.
• Includes two 1/4-20 and two 3/8-16 threaded holes with locking attachment stoppers.

• 100W D-Tap to USB-C bi-directional charging adapter.
• Compatible with Gold Mount, V-Mount, and BP-U batteries.
• Uses PD charging protocol Type C with 10-16.8 V and 10 A output on D-Tap.
• Heat dissipating casing prevents overheating.

• Tripod Holder Kit compatible with SHAPE WAGON Camera Cart.
• Includes a 32 inch (82 cm) silver pole with baby pin.
• Adjustable tripod holder arms with 360° rotation.
• Constructed with CNC machined aluminum brackets.

• Heavy Light Stand Hanger compatible with SHAPE WAGON Camera Cart.
• Designed to hang on the cart's top shelf side walls.
• Accommodates heavier light stands for storage.
• Constructed from sturdy sheet metal.

• Kit includes 2 cable hooks for camera carts.
• Compatible with SHAPE WAGON Camera Cart.
• Designed to organize cables and extension cords.
• Hooks attach to camera cart cross bars and are covered with rubber.

• Set of two C-Stand hangers for camera carts.
• Compatible with SHAPE WAGON Camera Cart.
• Includes two super clamps for secure attachment.
• Constructed from aluminum with a 90° design.

• Compatible with Sony FX9 camera.
• Includes form-fitting cage with Arri rosette and mounting options.
• Baseplate integrates shoulder mount and 15 mm rod system.
• Left handle features Arri rosette and push-button technology.