Cadeau SMAG

• Replacement camera platform for the Magic Arm.
• Standard 1/4-20 inch thread mount for cameras.
• Compatible with Magic Arm.
• Made of aluminium.

• Attaches accessories with 1/4-20 threaded hole.
• Includes adjustable 1/4-20 screw.
• Features 1/2 inch aluminum spacer with 1/4-20 threaded hole.
• Constructed from plastic.

• Features a 1/4-20 stud on top and a female shoe bottom.
• Compatible with male hot shoe or Magic Arm attachments.
• Includes a 0.5 inch spacer with 1/4-20 threaded socket and adjustable 1/4-20 screw.
• Constructed from aluminum for durability.

• Holds microphones with diameters from 19 to 30 mm (0.75 to 1.2 in).
• Constructed from CNC machined aluminum for durability.
• Features a standard 1/4"-20 threaded hole for rig attachment.
• Includes a 3/8"-16 to 1/4"-20 adapter for boom pole or stand connection.

• Unique design to fit SHAPE Quick Handle System with patented Push-Button technology.
• Ideal to adjust the angle of the hand grip for improved ergonomics.
• Allows control of record trigger, power on/off, and other functions when combined with Canon hand grip.
• Includes threaded holes to fit the C300 handle and Canon C series relocator extension cable.

• Compact quick release plate equipped with a ¼-20 screw.
• Universal mount plate suitable for monitors, GoPro, and accessories.
• Load bearing capacity of 50 kg with anti-skid pad for secure mounting.
• Features dual-side press buttons for unlocking and a deadlock mode button for safety.

• Unique aluminum collar locks withstand heavier payloads.
• Min height of 40 inches (101,6cm) and max height of 83.5 inches (212,09cm).
• Damped spring risers prevent hand pinching between sections.
• Equipped with universal 1 1/8-inch Posi-V-Lock female receiver and 5/8-inch adjustable stud.

• Supports heavy lenses on 15 mm studio offset rods with 100 mm spacing Snap-On design.
• Features reversible 1/4-20 and 3/8-16 threaded mounting stud for lens attachment.
• Includes vertical travel distance adjustment of 1.5 in (3.81 cm) and rubber-padded Y-Lens Adapter for protection.
• Constructed from CNC Machined Aluminum with ratchet knob and spring-loaded locking lever for secure clamping.

• Provides support for long lenses to relieve pressure on the camera's lens mount.
• Compatible with any standard 15 mm rods system.
• Features a vertically adjustable bracket for different lens diameters.
• Includes a sliding rod block with a thumbscrew for tightening to 15 mm rods.

• Designed for 24-inch (600,96cm) monitors.
• Provides three-sided glare protection.
• Attaches with included Velcro® type strips.
• Made of resilient polyester with sturdy internal panels.

• Gold Mount pivoting battery plate compatible with Canon C80 top plate.
• Push-button system allows tilting the battery plate up and down for easy access.
• Includes 2 D-Tap ports and a protective digital fuse.
• Made of CNC machined aluminum for durability.

• Lens support adapter for Channel Baseplates.
• Compatible with DJI Ronin RS Series lower quick-release plates.
• Includes three stainless steel support rods with 1/4-20 threading in different lengths.
• Base made of CNC machined aluminum with M4 screws for attachment.

• Left telescopic handgrip with ARRI rosettes for camera or camera support attachment.
• Arm features four points of articulation including two push-button joints and two ratchet knobs.
• Arm extends up to 2 inches (5cm) and rotates 360 degrees with position markings for recall.
• Rubber handgrips provide stability and precision; made of CNC machined aluminum.

• Single red knob enables fast and easy adjustment with two points of articulation.
• Ergonomic handle features rubber handgrips for stability and precision.
• Patented push-button system allows 360-degree rotation of the handle.
• Constructed with CNC machined parts and hard anodized aluminum for durability.

• Coiled LANC cable with male connectors on both ends.
• 11 inches (27,94cm) long when coiled and approximately 20 inches (51cm) when extended.
• Designed to connect SHAPE Remote Extension Handle to Blackmagic Ursa Mini.
• Compatible with cameras featuring 2.5 mm LANC male connectors.

• LANC coiled cable with male and female 2.5 mm connectors.
• Designed to plug the SHAPE Remote Extension Handle.
• 10 inches long when coiled and approximately 20 inches when extended.
• Right angle male connector included.

• Top handle with multiple threaded holes for attaching camera accessories.
• Handgrip made of Canadian maple for ergonomics, comfort, and security.
• Anodized parts protect against wear and oxidation.
• Constructed of CNC aluminum for durability.

• Designed to fit 5-inch Atomos Ninja V and V+ monitors.
• Made from lightweight CNC-machined aluminum.
• Features 1/4-20 screw with anti-rotation blocks for secure attachment.
• Includes 1/4-20 threads and a cold shoe mount for accessories.

• Jackscrew designed for follow focus markers.
• Compatible with SHAPE follow focus systems.
• Constructed with CNC machined parts.
• Dimensions are 1.75 × 0.13 × 0.13 inches (4.45 × 0.32 × 0.32 cm).

• Hot Swap V-Mount Power Box Battery with 14.4V and 36Wh capacity.
• Designed for uninterrupted power supply during battery switch.
• Includes two Twist D-Tap and two LEMO 2-pin output ports.
• Features 3-color LED indicator for internal battery level.

• Adapter plate designed to fit the Sony FX9 top plate.
• Features 18 1/4-20 threaded holes for versatile mounting options.
• Constructed from thin, lightweight CNC aluminum.
• Enables mounting or replacement of the top handle on the Sony PXW-FX9 camera.

• Features one HDMI connector and one Micro-HDMI connector.
• Cable length is 5 feet (150.5 cm).
• Compatible with Sony a7S camera's cable protector.
• Designed for high-speed HDMI transmission.

• Rod bloc fits 15 mm lightweight to 19 mm studio rods.
• Left and right telescopic handgrips with ARRI rosettes.
• Each arm has 4 points of articulation and extends up to 2 inches (5,08cm) with 360° rotation.
• Includes patented push-button system for fast adjustment and shock-resistant case.

• Locks and protects HDMI in/out cables on Atomos Ninja V and V+ monitors.
• Features adjustable brackets to fit different HDMI cable sizes.
• Made from lightweight CNC-machined aluminum.
• Includes two captive thumbscrews for cable security.